MRO Gaskets - VR 80 Maxium Operating Pressures

Home

Main Menu

Home

Capabilities

Our Company Sites

MRO Gaskets Information

Interface Solutions (Armstrong) materials. Email or call us for all your non-asbestos gasket materials from Interface Solutions (formerly Armstrong). AFGCO is a leading VAN member dedicated to processing and distributing Interface materials. Contact us for all grades of Interface materials, CS-301, MP-15, CMP-4000, VB-72 to name just a few.

Victor Reinz is a global leader in non-asbestos fiber materials. These premium materials are now available from AFGCO. Available in sheets or cut parts, Victor Reinz materials are preferred by OEMs around the world .Victor Reinz material can be found in chemical plants, refineries, food processing, shipbuilding, power generation, beverage, air conditioning, heating and refrigeration, gas and water installations - Flanges, valves, tanks, radiators, compressors, pumps, plate heat exchangers, and ammonia sealing applications.

We are pleased to announce that we are now a 3M Converter. AFGCO can add or supply 3M products for all of your MRO needs.

Other Menu

Administrator

VR 80 Maxium Operating Pressures

Max. operating pressure ¹⁾ (psi) at medium
Temperature (°F)	Thickness(inch)	Water, steam, aqueous solutions	Gases	Acids³⁾, alkaline solutions³⁾, amines, acid derivatives	Oils, greases	Fuels, solvents
–148²⁾	0.0394	-	232	-	580	363
	0.0787	-	145	-	363	232
	0.1181	-	87	-	145	145
–58	0.0394	580	580	145	928	580
	0.0787	363	363	87	580	363
	0.1181	232	232	29	363	232
32	0.0394	1450	928	363	1450	928
	0.0787	928	580	232	928	580
	0.1181	580	363	145	580	363
122	0.0394	1450	928	363	1450	928
	0.0787	928	580	232	928	580
	0.1181	580	363	145	580	363
212	0.0394	928	580	232	928	580
	0.0787	580	363	145	580	363
	0.1181	363	232	87	363	145
302	0.0394	363	363	145	580	363
	0.0787	145	232	87	363	232
	0.1181	87	145	29	232	145
392	0.0394	-	232	-	363	-
	0.0787	-	145	-	232	-
	0.1181	-	29	-	145	-
482	0.0394	-	-	-	145	-
	0.0787	-	-	-	87	-
	0.1181	-	-	-	29	-

		The data quoted above are valid for the material "as delivered" without any additional treatment and with sufficient surface pressure, e.g. according to DIN 28 090ff. In view of the multiplicity of possible gasket designs as well as installation and operating conditions, definitive conclusions cannot be drawn for all applications regarding the behavious in a sealing joint. For this reason, we do not give any warranty for technical data. They do not represent warranted properties. If you have any doubt, please contact us and specify exact operating conditions.
¹⁾		Very much higher pressure values are possibly permitted for flanges with projections and recesses or grooves and tongues. Please consult us in individual cases, specifying exact sealing conditions.
²⁾		Use at temperatures below –58 °F (-50 °C) is possible when surface pressure does not drop below approx. 2180 psi (15 N/mm²) in liquids or 4350 psi (30 N/mm²) in gases (internal pressure must be considered). In addition, the gasket must not show bending stress or reversed bending stress. At temperatures below -148 °F (–100 °C), operating pressures may not be greater than the max. values given for -148 °F (–100 °C).
³⁾		Observe the Chemical Resistance in the media table "About the chemical resistance of VR 80" At temperatures > 122 °F (> 50 °C), tests under conditions of use must be conducted in the case of strong acids or alkaline solutions, such as hydrochloric acid or potassium hydroxide solution. This material is not resistant to nitric acid > 20 %. In this case, we recommend the use of gaskets made of REINZOFLON^®100 (filled PTFE); please contact Target Marketing, Inc. .

[ Back ]

ISO 9001:2000 JUST IN TIME, KANBAN, DOCK TO STOCK, SPECIAL PACKAGING, DROP SHIPMENTS... MRO GASKETS CAN SUPPLY WHAT YOU NEED, WHEN YOU NEED IT

3239 South 51st. Avenue, Cicero, Illinois 60804 Phone: 708-780-9000 • Fax: 708-780-9009 • sales@mrogaskets.com

Home Capabilities Quality MRO Materials Search Free Decimal Chart Contact Us Site Map