Home
Main Menu
Home
Capabilities
Quality
MRO Materials
Search
Free Decimal Chart
Contact Us
Site Map
Our Company Sites
AFGCO Site
Lighting Gaskets
MRO Gaskets Information

Interface Solutions (Armstrong) materials.  Email or call us for all your non-asbestos gasket materials from Interface Solutions (formerly Armstrong).  AFGCO is a leading VAN member dedicated to processing and distributing Interface materials.  Contact us for all grades of Interface materials, CS-301, MP-15, CMP-4000, VB-72 to name just a few.

Victor Reinz is a global leader in non-asbestos fiber materials.  These premium materials are now available from AFGCO.  Available in sheets or cut parts, Victor Reinz materials are preferred  by OEMs around the world .Victor Reinz material can be found in chemical plants, refineries, food processing, shipbuilding, power generation, beverage, air conditioning, heating and refrigeration, gas and water installations - Flanges, valves, tanks, radiators, compressors, pumps, plate heat exchangers, and ammonia sealing applications.

We are pleased to announce that we are now a 3M Converter. AFGCO can add or supply 3M products for all of your MRO needs. 



 
Other Menu
Administrator
VR 90 Maximum operating pressures E-mail
Max. operating pressure 1) (psi) at medium
Temperature
(°F)		 Thickness(inch)

Water,
steam, aqueous solutions

Gases Acids 3), alkaline solutions 3), amines, acid derivatives Oils, greases Fuels, solvents
-1482) 0.0394 - 363 - 580 363
0.0787 - 232 - 363 232
0.1181 - 145 - 145 145
-58 0.0394 1450 928 363 1160 928
0.0787 928 580 232 928 580
0.1181 580 363 145 580 363
32 0.0394 1813 1450 580 1886 1160
0.0787 1305 928 363 1450 928
0.1181 928 580 290 928 580
122 0.0394 1813 1450 580 1886 1160
0.0787 1305 928 363 1450 928
0.1181 928 580 290 928 580
212 0.0394 1595 1305 435 1740 1088
0.0787 1088 870 290 1305 725
0.1181 725 435 232 725 363
302 0.0394 1305 1015 363 1305 725
0.0787 725 725 232 1015 435
0.1181 435 363 145 435 232
392 0.0394 580 580 - 928 363
0.0787 363 363 - 508 232
0.1181 232 145 - 232 145
482 0.0394 - 145 - 580 -
0.0787 - 87 - 232 -
0.1181 - 29 - 145 -
 
buch The data quoted above are valid for the material "as delivered" without any additional treatment and with sufficient surface pressure, e.g. according to DIN 28 090ff. In view of the multiplicity of possible gasket designs as well as installation and operating conditions, definitive conclusions cannot be drawn for all applications regarding the behavious in a sealing joint. For this reason, we do not give any warranty for technical data. They do not represent warranted properties. If you have any doubt, please contact us and specify exact operating conditions.
1)  Very much higher pressure values are possibly permitted for flanges with projections and recesses or grooves and tongues. Please consult us in individual cases, specifying exact sealing conditions.
2)  Use at temperatures below –58 °F (-50 °C) is possible when surface pressure does not drop below approx. 2180 psi (15 N/mm²) in liquids or 4350 psi (30 N/mm²) in gases (internal pressure must be considered). In addition, the gasket must not show bending stress or reversed bending stress. At temperatures below -148 °F (–100 °C), operating pressures may not be greater than the max. values given for -148 °F (–100 °C).
3)  The data in the media table "About the chemical resistance of VR 90" should be observed for strong acids or alkaline solutions such as hydrochloric acid or potassium hydroxide solution. If the material is not resistant to the medium in question, we recommend the use of gaskets made of REINZOFLON® 100 (filled PTFE); please contact Target Marketing, Inc. .
  e_1_us
  e_2_us
  e_3_us
  e_4_us
  e_5_us
 
[ Back ]
ISO 9001:2000 JUST IN TIME, KANBAN, DOCK TO STOCK, SPECIAL PACKAGING, DROP SHIPMENTS... MRO GASKETS CAN SUPPLY WHAT YOU NEED, WHEN YOU NEED IT
3239 South 51st. Avenue, Cicero, Illinois 60804 Phone: 708-780-9000 • Fax: 708-780-9009 • sales@mrogaskets.com
Home Capabilities Quality MRO Materials Search Free Decimal Chart Contact Us Site Map